[MPlayer-users] Re: pre3: TV jams every 74 frames

[Jörg]

Hello again,

i found the problem. A other program (edonkey front end) seems to cause it. 
The picture is perfect after closing it. Still I wonder the reason, since 
mplayer only uses 30% cpu and it doesn't happen when playing recorded files.

Thanx again
Jörg


Am Mittwoch, 10. Dezember 2003 21:24 schrieb Jörg:
> Hallo all,
>
> since I upgaded to pre3 my tv it halts for eproximatey 10 ms exactly after
> 74 frames are displayed smoothly.
>
> I use
>
> mplayer -fs -dr -double -tv
> driver=v4l:chanlist=europe-west:channels=E9-ARD,30-ZDF,46-RTL,48-SAT1,40-ND
>R,34-HH1:width=768:height=576 -vop crop=752:564:8:6,pp=lb -vo xv -ao arts
> tv://
>
> CPU usage is at 30%.
>
> If I record TV with mencoder and then play it. everything is fine.
>
> anyone, any hints?
>
> Thanx for the great player
> Jörg
>
>
>
> ----
> MPlayer 1.0pre3-3.3.1 (C) 2000-2003 MPlayer Team
>
> CPU: Advanced Micro Devices Athlon K75 Pluto,Orion 748.8 MHz (Family: 6,
> Steppin
> g: 2)
> Detected cache-line size is 64 bytes
> CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
> Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx
>
> Reading config file /usr/local/etc/mplayer/mplayer.conf: Datei oder
> Verzeichnis
> nicht gefunden
> Reading config file /home/js/.mplayer/config
> Reading /home/js/.mplayer/codecs.conf: Can't open '/home/js/.mplayer/
> codecs.conf
> ': Datei oder Verzeichnis nicht gefunden
> Reading /usr/local/etc/mplayer/codecs.conf: Can't open '/usr/local/etc/
> mplayer/c
> odecs.conf': Datei oder Verzeichnis nicht gefunden
> Using built-in default codecs.conf.
> font: can't open file: /home/js/.mplayer/font/font.desc
> Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206
> chars) Using Linux hardware RTC timing (1024Hz).
> Can't open input config file /home/js/.mplayer/input.conf: Datei oder
> Verzeichni
> s nicht gefunden
> Can't open input config file /usr/local/etc/mplayer/input.conf: Datei oder
> Verze
> ichnis nicht gefunden
> Falling back on default (hardcoded) input config
> Setting up LIRC support...
> mplayer: could not connect to socket
> mplayer: Verbindungsaufbau abgelehnt
> Failed to open LIRC support.
> You will not be able to use your remote control.
>
> Playing tv://.
> TV detected! ;-)
> Selected driver: v4l
>  name: Video 4 Linux input
>  author: Alex Beregszaszi
>  comment: under development
> Selected device: BT878(Hauppauge (bt878))
>  Capabilites: capture tuner overlay clipping frameram scales
>  Device type: 235
>  Supported sizes: 48x32 => 924x576
>  Inputs: 4
>   0: Television: tuner audio tv camera  (tuner:1, norm:pal)
>   1: Composite1: audio camera  (tuner:0, norm:pal)
>   2: S-Video: audio camera  (tuner:0, norm:pal)
>   3: Composite3: audio camera  (tuner:0, norm:pal)
> Card reports an unknown audio mode !
> Trying two channel audio. Use forcechan to override.
> Using input 'Television'
> TV channel names detected.
> Selected channel: E9 - ARD (freq: 203,250)
> vo: X11 running at 1600x1200 with depth 24 and 32 bpp (":0.0" => local
> display)
> Disabling DPMS
> Opening video filter: [crop w=752 h=564 x=8 y=6]
> Crop: 752 x 564, 8 ; 6
> Opening video filter: [pp=lb]
> ==========================================================================
> Opening video decoder: [raw] RAW Uncompressed Video
> VDec: vo config request - 768 x 576 (preferred csp: Planar YV12)
> [PP] Using external postprocessing filter, max q = 6.
> VDec: using Planar YV12 as output csp (no 0)
> Movie-Aspect is undefined - no prescaling applied.
> VO: [xv] 752x564 => 752x564 Planar YV12  [fs]Audio: no sound
> Selected video codec: [rawyv12] vfm:raw (RAW YV12)
> ==========================================================================
> Starting playback...