[MPlayer-users] screen blurred in full screen mode

[Yuchung Cheng]

On 10-18-2003, Corey Hickey wrote:
> 2. 0.90 is really old anyway. You should try 1.0pre2 or the latest cvs.
> 
> 3. If you still have the problem, then please post the _entire_ output
> of
> $ mplayer -v somefilename
> 
> -Corey
I updated mplayer and found some clues. I kept enlarging the window and
it starts getting more and more "little snakes" on the screen (sorry for 
the poor descriptions). I was playing at 1280x1024 and the screen is fine 
at 1230x753 but bad after 1249x766. 

Thanks for help.

-yuchung

here is my mplayer -v output:

MPlayer 1.0pre2-3.2.2 (C) 2000-2003 MPlayer Team
CPU: Intel Pentium 4/Xeon/Celeron Northwood 2406 MHz (Family: 8, Stepping: 9)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Reading config file /etc/mplayer/mplayer.conf: No such file or directory
Reading config file /home/ycheng/.mplayer/config
Reading /home/ycheng/.mplayer/codecs.conf: Can't open '/home/ycheng/.mplayer/codecs.conf': No such file or directory
Reading /etc/mplayer/codecs.conf: Can't open '/etc/mplayer/codecs.conf': No such file or directory
Using built-in default codecs.conf
CommandLine: '-v' 'test.avi'
get_path('font/font.desc') -> '/home/ycheng/.mplayer/font/font.desc'
Font /home/ycheng/.mplayer/font/font.desc loaded successfully! (14064 chars)
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system startup
scripts.
Using usleep() timing
get_path('input.conf') -> '/home/ycheng/.mplayer/input.conf'
Can't open input config file /home/ycheng/.mplayer/input.conf: No such file or directory
Can't open input config file /etc/mplayer/input.conf: No such file or directory
Falling back on default (hardcoded) input config
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : No such device
Can't init input joystick
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support.
You will not be able to use your remote control.
get_path('test.avi.conf') -> '/home/ycheng/.mplayer/test.avi.conf'
 
Playing test.avi
[file] File size is 34113224 bytes
STREAM: [file] test.avi
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
AVI file format detected.
list_end=0x22A6
======= AVI Header =======
us/frame: 40000  (fps=25.000)
max bytes/sec: 0
padding: 0
MainAVIHeader.dwFlags: (272) HAS_INDEX IS_INTERLEAVED
frames  total: 6923   initial: 0
streams: 2
Suggested BufferSize: 102078
Size:  640 x 368
==========================
list_end=0x10F4
==> Found video stream: 0
====== STREAM Header =====
Type: vids   FCC: DX50 (30355844)
Flags: 0
Priority: 0   Language: 0
InitialFrames: 0
Rate: 25/1 = 25.000
Start: 0   Len: 6923
Suggested BufferSize: 102078
Quality -1
Sample size: 0
==========================
found 'bih', 40 bytes of 40
======= VIDEO Format ======
  biSize 40
  biWidth 640
  biHeight 368
  biPlanes 1
  biBitCount 24
  biCompression 808802372='DX50'
  biSizeImage 706560
===========================
Regenerating keyframe table for DIVX 4 video
list_end=0x219A
==> Found audio stream: 1
====== STREAM Header =====
Type: auds   FCC:  (0)
Flags: 0
Priority: 0   Language: 0
InitialFrames: 0
Rate: 15954/1 = 15954.000
Start: 0   Len: 4417985
Suggested BufferSize: 3661
Quality 0
Sample size: 1
==========================
found 'wf', 50 bytes of 18
======= WAVE Format =======
Format Tag: 85 (0x55)
Channels: 2
Samplerate: 44100
avg byte/sec: 15954
Block align: 1
bits/sample: 0
cbSize: 12
mp3.wID=1
mp3.fdwFlags=0x2
mp3.nBlockSize=417
mp3.nFramesPerBlock=1
mp3.nCodecDelay=1393
===========================
list_end=0x22A6
Broken chunk?  chunksize=1362  (id=JUNK)
list_end=0x2067F90
Found movie at 0x280C - 0x2067F90
Reading INDEX block, 8307 chunks for 6923 frames (fpos=0x2067f98)
AVI index offset: 0x2808 (movi=0x280C idx0=0x4 idx1=0xA1A)
Auto-selected AVI video ID = 0
Auto-selected AVI audio ID = 1
AVI: Searching for audio stream (id:1)
XXX initial  v_pts=0.160  a_pos=0 (0.000)
AVI video size=29483133 (6923) audio size=4417985 (4417985)
VIDEO:  [DX50]  640x368  24bpp  25.000 fps  851.7 kbps (104.0 kbyte/s)
[V] filefmt:3  fourcc:0x30355844  size:640x368  fps:25.00  ftime:=0.0400
get_path('sub/') -> '/home/ycheng/.mplayer/sub/'
get_path('default.sub') -> '/home/ycheng/.mplayer/default.sub'
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer
mp3lib: made decode tables with MMX optimization
mp3lib: using MMX optimized decore!
MP3lib: init layer2&3 finished, tables done
MPEG 1.0, Layer III, 44100 Hz 128 kbit Joint-Stereo, BPF: 417
Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 16000->176400 (128.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
X11 opening display: :0.0
vo: X11 color mask:  FFFFFF  (R:FF0000 G:FF00 B:FF)
vo: X11 running at 1280x1024 with depth 24 and 32 bpp (":0.0" => local display)
[x11] Detected wm supports layers.
[x11] Using workaround for Metacity bugs.
[x11] Detected wm supports NetWM.
[x11] Detected wm supports FULLSCREEN state.
[x11] Detected wm supports ABOVE state.
[x11] Detected wm supports BELOW state.
[x11] Current fstype setting honours FULLSCREEN ABOVE BELOW X atoms
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
INFO: libavcodec init OK!
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
[libaf] Adding filter dummy
[dummy] Was reinitialized, rate=44100Hz, nch = 2, format = 0x00000001 and bps =
2
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
ao2: 44100 Hz  2 chans  Signed 16-bit (Little-Endian)
audio_setup: using '/dev/dsp' dsp device
audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endian))
audio_setup: using 2 channels (requested: 2)
audio_setup: using 44100 Hz samplerate (requested: 44100)
audio_setup: frags:  16/16  (4096 bytes/frag)  free:  65536
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
AO: Description: OSS/ioctl audio output
AO: Author: A'rpi
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
[dummy] Was reinitialized, rate=44100Hz, nch = 2, format = 0x00000001 and bps =
2
[dummy] Was reinitialized, rate=44100Hz, nch = 2, format = 0x00000001 and bps =
2
Starting playback...
[ffmpeg] aspect_ratio: 1.739130
VDec: vo config request - 640 x 368 (preferred csp: Planar YV12)
Trying filter chain: vo
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.74:1 - prescaling to correct movie aspect.
VO Config (640x368->640x368,flags=0,'MPlayer',0x32315659)
VO: [xv] 640x368 => 640x368 Planar YV12
VO: Description: X11/Xv
VO: Author: Gerd Knorr <kraxel at goldbach.in-berlin.de> and others
Xvideo image format: 0x32595559 (YUY2) packed
Xvideo image format: 0x32315659 (YV12) planar
Xvideo image format: 0x59565955 (UYVY) packed
Xvideo image format: 0x30323449 (I420) planar
using Xvideo port 145 for hw scaling
[xv] dx: 0 dy: 0 dw: 640 dh: 392
*** [vo] Allocating (slices) mp_image_t, 640x368x12bpp YUV planar, 353280 bytes
[xv] dx: 0 dy: 0 dw: 640 dh: 392
frame skip 8  0.0 A-V:  0.147 ct:  0.000    1/  1   0%  0%  0.0% 0 0 0%
*** [vo] Allocating (slices) mp_image_t, 640x368x12bpp YUV planar, 353280 bytes
*** [vo] Allocating (slices) mp_image_t, 640x368x12bpp YUV planar, 353280 bytes
[x11] NET style stay on top (layer 1). Using state _NET_WM_STATE_ABOVE.
[xv] dx: 0 dy: 0 dw: 1280 dh: 1024
[xv-fs] dx: 0 dy: 119 dw: 1280 dh: 786
[x11] NET style stay on top (layer 0). Using state _NET_WM_STATE_ABOVE.
[xv] dx: 0 dy: 0 dw: 640 dh: 392:  0.037  263/263   5%  2%  1.0% 0 0 0%
Uninit audio filters...-0.002 ct:  0.032  314/314   5%  2%  1.0% 0 0 0%
[libaf] Removing filter dummy
uninit audio: mp3lib
uninit video: ffmpeg
DEMUXER: freeing demuxer at 0x8609828
vo: uninit ...
 
Exiting... (Quit)