[MPlayer-users] mplayer crashes when trying to play ftp://mplayerhq.hu/MPlayer/incoming/almost.mpeg

Andrey Sukhorukov ans124 at rsphy1.anu.edu.au
Sun May 19 07:47:02 CEST 2002


(for system info, see ftp://mplayerhq.hu/MPlayer/incoming/almost.txt)

--------------------------------------------------------------------------
=================== mplayer -v almost.mpeg ======================
--------------------------------------------------------------------------

MPlayer 0.90pre4-3.0.4 (C) 2000-2002 Arpad Gereoffy (see DOCS!)

CPU vendor name: GenuineIntel  max cpuid level: 2
CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Type: 6, Stepping: 3)
Testing OS support for SSE... yes.
Testing OS support for SSE unmasked exceptions... yes.
Tests of OS support for SSE passed.
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled with RUNTIME CPU Detection - warning, it's not optimal! To get best 
performance, recompile mplayer from sources with 
--disable-runtime-cpudetection
/home/as/.mplayer/config(11): option: vo
/home/as/.mplayer/config(11): parameter: sdl
/home/as/.mplayer/config(14): option: ao
/home/as/.mplayer/config(14): parameter: sdl
/home/as/.mplayer/config(17): option: fs
/home/as/.mplayer/config(17): parameter: yes
/home/as/.mplayer/config(127): option: framedrop
/home/as/.mplayer/config(127): parameter: yes
Reading /home/as/.mplayer/codecs.conf: can't open 
'/home/as/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/share/mplayer/codecs.conf: 34 audio & 92 video codecs
CommandLine: '-v' '../almost.mpeg'
get_path('font/font.desc') -> '/home/as/.mplayer/font/font.desc'
font: can't open file: /home/as/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Linux RTC init error in ioctl (rtc_pie_on): Permission denied
Using usleep() timing
get_path('input.conf') -> '/home/as/.mplayer/input.conf'
Can't open input config file /home/as/.mplayer/input.conf : No such file or 
directory
Falling back on default (hardcoded) config
Playing ../almost.mpeg
Not an URL!
File size is 1556484 bytes
Checking for YUV4MPEG2
DEMUXER: freeing demuxer at 0x82855a8
ASF_check: not ASF guid!
DEMUXER: freeing demuxer at 0x82855a8
Checking for NuppelVideo
DEMUXER: freeing demuxer at 0x82855a8
Checking for MOV
DEMUXER: freeing demuxer at 0x82855a8
Checking for VIVO
header block 1 size: 0
DEMUXER: freeing demuxer at 0x82855a8
Checking for REAL
DEMUXER: freeing demuxer at 0x82855a8
DEMUXER: freeing demuxer at 0x82855a8
DEMUXER: freeing demuxer at 0x82855a8
DEMUXER: freeing demuxer at 0x82855a8
DEMUXER: freeing demuxer at 0x82855a8
DEMUXER: freeing demuxer at 0x82855a8
system stream synced at 0xB (0)!
==> Found video stream: 0
Detected MPEG-PS file format!
==> Found audio stream: 0
Searching for sequence header... OK!
VIDEO:  MPEG1  314x232  (aspect 8)  25.00 fps  1125.0 kbps (140.6 kbyte/s)
[V] filefmt:2  fourcc:0x10000001  size:314x232  fps:25.00  ftime:=0.0400
get_path('sub/') -> '/home/as/.mplayer/sub/'
Detected audio codec: [mp3] drv:1 (MPEG layer-2, layer-3)
Initializing audio codec...
Selecting Audio Decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer
mp3lib: made decode tables with MMX optimization
init layer2&3 finished, tables done
mp3lib: using MMX optimized decore!
MPEG 1.0, Layer II, 44100 Hz 224 kbit Stereo, BPF: 731
Channels: 2, copyright: No, original: No, CRC: No, emphasis: 0
AUDIO: srate=44100  chans=2  bps=2  sfmt=0x10  ratio: 28000->176400
==========================================================================
Opening Video Decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 314 x 232, Mpeg PES
[PP] Sorry, postprocessing is not available
vo_debug: query(Mpeg PES) returned 0x0 (i=0)
Couldn't find matching colorspace - retrying with -vop scale...
SwScale: -1 x -1 (-1=no scaling)
vo_debug: query(Mpeg PES) returned 0x0 (i=0)
Sorry, selected video_out device is incompatible with this codec.
VDecoder init failed :(
Opening Video Decoder: [libmpeg2] MPEG 1/2 Video decoder v2.0
libmpeg2: Using MMXEXT for IDCT transform
libmpeg2: Using MMXEXT for motion compensation
VDec: vo config request - 314 x 232, Planar YV12
[PP] Sorry, postprocessing is not available
vo_debug: query(Planar YV12) returned 0x437 (i=0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
video_out->init(314x232->314x236,flags=1,'MPlayer',0x32315659)
VO: [sdl] 314x232 => 314x236 Planar YV12 fs
VO: Description: SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!)
VO: Author: Ryan C. Gordon <icculus at lokigames.com>, Felix Buenemann 
<atmosfear at users.sourceforge.net>
SDL: Using 0x32315659 (Planar YV12) image format
SDL: deactivating XScreensaver/DPMS
SDL: X11 Resolution 1024x768
Disabling DPMS
stat: 1
SDL: Using driver: x11
SDL: using hardware-surface
SDL: setting zoomed fullscreen without modeswitching
SDL: Info - please use -vm or -zoom to switch to best resolution.
Detected video codec: [mpeg12] drv:1 prio:0 (MPEG 1 or 2)
==========================================================================
AO: [sdl] 44100Hz Stereo Signed 16-bit (Little-Endian)
AO: Description: SDLlib audio output
AO: Author: Felix Buenemann <atmosfear at users.sourceforge.net>
SDL: Samplerate: 44100Hz Channels: Stereo Format Signed 16-bit (Little-Endian)
SDL: buf size = 4096
Start playing...
*** [vo] Allocating mp_image_t, 320x240x12bpp YUV planar, 115200 bytes
*** [vo] Allocating mp_image_t, 320x240x12bpp YUV planar, 115200 bytes%


MPlayer interrupted by signal 11 in module: decode_video
- MPlayer crashed by bad usage of CPU/FPU/RAM. Recompile MPlayer with 
--enable-debug and make a 'gdb' backtrace and disassembly. For details, see 
DOCS/bugreports.html section 5.b.
- MPlayer crashed. This shouldn't happen. It can be a bug in the MPlayer code 
_or_ in your drivers _or_ in your gcc version. If you think it's MPlayer's 
fault,
please read DOCS/bugreports.html and follow instructions there. We can't and 
won't help unless you provide these informations when reporting a possible 
bug.

*** free_stream() called ***
SDL: activating XScreensaver/DPMS
Successfully enabled DPMS
SDL: Audio Subsystem shutting down!
vo: x11 uninit called but X11 not inited..
[2]+  Done                    nedit mplayer.bug

--------------------------------------------------------------------------
===================== GDB TRACE  =========================================
--------------------------------------------------------------------------
 '-v' '../almost.mpeg'
font: can't open file: /home/as/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
header block 1 size: 0
mp3lib: made decode tables with MMX optimization
init layer2&3 finished, tables done
mp3lib: using MMX optimized decore!
 MPEG 1.0, Layer II, 44100 Hz 224 kbit Stereo, BPF: 731
Channels: 2, copyright: No, original: No, CRC: No, emphasis: 0
SwScale: -1 x -1 (-1=no scaling)
libmpeg2: Using MMXEXT for IDCT transform
libmpeg2: Using MMXEXT for motion compensation
SDL: Using 0x32315659 (Planar YV12) image format
SDL: deactivating XScreensaver/DPMS
SDL: X11 Resolution 1024x768
Disabling DPMS
stat: 1
SDL: Using driver: x11
SDL: using hardware-surface
SDL: setting zoomed fullscreen without modeswitching
SDL: Info - please use -vm or -zoom to switch to best resolution.
SDL: Samplerate: 44100Hz Channels: Stereo Format Signed 16-bit (Little-Endian)
SDL: buf size = 4096
[New Thread 1024 (LWP 17076)]
[New Thread 2049 (LWP 17077)]
[New Thread 1026 (LWP 17078)]

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 1024 (LWP 17076)]
0x0807cdc6 in fast_memcpy (to=0x40b9e000, from=0x8300120, len=160)
    at aclib_template.c:320
320			__asm__ __volatile__ (
#0  0x0807cdc6 in fast_memcpy (to=0x40b9e000, from=0x8300120, len=160)
    at aclib_template.c:320
#1  0x0807877e in draw_slice (image=0x82862c0, stride=0x82862cc, w=320, 
h=240, 
    x=0, y=0) at vo_sdl.c:1133
#2  0x080882d9 in put_image (vf=0x8283838, mpi=0x82862a0) at vf_vo.c:79
#3  0x080814a8 in decode_video (sh_video=0x82853e0, start=0x40783008 "", 
    in_size=7961, drop_frame=0) at dec_video.c:204
#4  0x080532ad in main (argc=3, argv=0xbfffdd84, envp=0xbfffdd94)
    at mplayer.c:1546
#5  0x404d6647 in __libc_start_main (main=0x804f6d0 <main>, argc=3, 
    ubp_av=0xbfffdd84, init=0x804d5fc <_init>, fini=0x8192694 <_fini>, 
    rtld_fini=0x4000dcd4 <_dl_fini>, stack_end=0xbfffdd7c)
    at ../sysdeps/generic/libc-start.c:129
Dump of assembler code from 0x807cda6 to 0x807cde6:
0x807cda6 <fast_memcpy+598>:	add    %cl,(%edi)
0x807cda8 <fast_memcpy+600>:	outsl  %ds:(%esi),(%dx)
0x807cda9 <fast_memcpy+601>:	push   %es
0x807cdaa <fast_memcpy+602>:	movq   0x8(%esi),%mm1
0x807cdae <fast_memcpy+606>:	movq   0x10(%esi),%mm2
0x807cdb2 <fast_memcpy+610>:	movq   0x18(%esi),%mm3
0x807cdb6 <fast_memcpy+614>:	movq   0x20(%esi),%mm4
0x807cdba <fast_memcpy+618>:	movq   0x28(%esi),%mm5
0x807cdbe <fast_memcpy+622>:	movq   0x30(%esi),%mm6
0x807cdc2 <fast_memcpy+626>:	movq   0x38(%esi),%mm7
0x807cdc6 <fast_memcpy+630>:	movntq %mm0,(%edi)
0x807cdc9 <fast_memcpy+633>:	movntq %mm1,0x8(%edi)
0x807cdcd <fast_memcpy+637>:	movntq %mm2,0x10(%edi)
0x807cdd1 <fast_memcpy+641>:	movntq %mm3,0x18(%edi)
0x807cdd5 <fast_memcpy+645>:	movntq %mm4,0x20(%edi)
0x807cdd9 <fast_memcpy+649>:	movntq %mm5,0x28(%edi)
0x807cddd <fast_memcpy+653>:	movntq %mm6,0x30(%edi)
0x807cde1 <fast_memcpy+657>:	movntq %mm7,0x38(%edi)
0x807cde5 <fast_memcpy+661>:	add    $0x40,%esi
End of assembler dump.

*** free_stream() called ***
SDL: activating XScreensaver/DPMS
Successfully enabled DPMS
SDL: Audio Subsystem shutting down!

--------------------------------------------------------------------------




More information about the MPlayer-users mailing list