[MPlayer-users] ANNOUNCE: X11 fullscreen fixed ?

Diego Biurrun diego at biurrun.de
Mon May 13 18:56:01 CEST 2002


Hi!

The problem described here

http://mplayerhq.hu/pipermail/mplayer-users/2002-May/014824.html

was resolved after I told sawfish to forget the state of the mplayer
window, so I guess that bug report is worth a few liters of cola ;-)

However, I still have problems with fullscreen mode and -vo xmga.

Pressin 'f' has absolutely no effect for me.  It has definitely worked
before and it works fine with -vo xv and -vo x11.

My window manager is sawfish together with GNOME, version
1.0.1.20020116-3.

I run Debian Woody with kernel 2.4.18 + O(1) + preempt + lowlatency, X
4.1.0-16, libc 2.2.5-4, gcc 2.95.4-7 and binutils 2.12.90.0.1.

My hardware is a K6-2 500, a SB Live! and a Matrox MGA G200 AGP with
Matrox drivers version 2.0beta.

Here is the mplayer (recompiled with --enable-debug=3) -v output and
lspci -vv below, if you need further information, I will be glad to
provide it.

Diego



MPlayer CVS-020513-17:26-2.95.4 (C) 2000-2002 Arpad Gereoffy (see DOCS!)

CPU vendor name: AuthenticAMD  max cpuid level: 1
CPU: Advanced Micro Devices K6-2 (Type: 5, Stepping: 12)
extended cpuid-level: 5
CPUflags: Type: 5 MMX: 1 MMX2: 0 3DNow: 1 3DNow2: 0 SSE: 0 SSE2: 0
Compiled for x86 CPU with features: MMX 3DNow
/etc/mplayer.conf(3): option: vo
/etc/mplayer.conf(3): parameter: xmga
Reading /home/diego/.mplayer/codecs.conf: 34 audio & 92 video codecs
CommandLine:get_path('font/font.desc') -> '/home/diego/.mplayer/font/font.desc'
 '-v' '/var/tmp/FinalFantasy.avi'
Using MMX (with tiny bit 3DNow) Optimized OnScreenDisplay
Font /home/diego/.mplayer/font/font.desc loaded successfully! (206 chars)
Using Linux's hardware RTC timing (1024Hz)
get_path('input.conf') -> '/home/diego/.mplayer/input.conf'
Can't open input config file /home/diego/.mplayer/input.conf : No such file or directory
Falling back on default (hardcoded) config
Playing /var/tmp/FinalFantasy.avi
Not an URL!
File size is 734099456 bytes
Detected AVI file format!
list_end=0x2292
list_end=0x10F4
======= AVI Header =======
us/frame: 41708  (fps=23.976)
max bytes/sec: 0
padding: 0
MainAVIHeader.dwFlags: (272) HAS_INDEX IS_INTERLEAVED
frames  total: 146071   initial: 0
streams: 2
Suggested BufferSize: 0
Size:  576 x 320
==> Found video stream: 0
found 'bih', 40 bytes of 40
======= STREAM Header =======
Type: vids   FCC: div3 (33766964)
Flags: 0
Priority: 0   Language: 0
InitialFrames: 0
Rate: 23976/1000 = 23.976
Start: 0   Len: 146071
Suggested BufferSize: 49844
Quality 10000
Sample size: 0
Regenerating keyframe table for DIVX 3 video
======= VIDEO Format ======
  biSize 40
  biWidth 576
  biHeight 320
  biPlanes 1
  biBitCount 24
  biCompression 861292868='DIV3'
  biSizeImage 552960
===========================
list_end=0x2186
==> Found audio stream: 1
found 'wf', 30 bytes of 20
======= STREAM Header =======
Type: auds   FCC:  (0)
Flags: 0
Priority: 0   Language: 0
InitialFrames: 1
Rate: 44100/1152 = 38.281
Start: 0   Len: 233221
Suggested BufferSize: 417
Quality -1
Sample size: 0
list_end=0x2292
======= WAVE Format =======
Format Tag: 85 (0x55)
Channels: 2
Samplerate: 44100
avg byte/sec: 15963
Block align: 1152
bits/sample: 0
cbSize: 12
mp3.wID=1
mp3.fdwFlags=0x2
mp3.nBlockSize=417
mp3.nFramesPerBlock=1
mp3.nCodecDelay=0
list_end=0x22B6
hdr=Software  size=15
Software  : Nandub v1.0rc2
Broken chunk?  chunksize=1346  (id=JUNK)
list_end=0x2B64D6F4
Found movie at 0x280C - 0x2B64D6F4
Reading INDEX block, 379292 chunks for 146071 frames
Broken chunk?  chunksize=0  (id=idx1)
Reading INDEX block, 379292 chunks for 146071 frames
AVI index offset: 0x2808 (movi=0x280C idx0=0x4 idx1=0x1AE)
Auto-selected AVI audio ID = 1
Auto-selected AVI video ID = 0
AVI: Searching for audio stream (id:1)
AVI video length=724751115
VIDEO:  [DIV3]  576x320  24bpp  23.98 fps  951.7 kbps (116.2 kbyte/s)
[V] filefmt:3  fourcc:0x33564944  size:576x320  fps:23.98  ftime:=0.0417
Clip info: 
 Software: Nandub v1.0rc2
get_path('sub/') -> '/home/diego/.mplayer/sub/'
Detected audio codec: [mp3] drv:1 (MPEG layer-2, layer-3)
Initializing audio codec...
Selecting Audio Decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer
AUDIO: srate=44100  chans=2  bps=2  sfmt=0x10  ratio: 16000->176400
mp3lib: made decode tables with MMX optimization
init layer2&3 finished, tables done
mp3lib: using 3DNow! optimized decore!

MPEG 1.0, Layer III, 44100 Hz 128 kbit Joint-Stereo, BPF: 417
Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0
==========================================================================
Opening Video Decoder: [ffmpeg] FFmpeg's libavcodec codec family
INFO: libavcodec init OK!
libavcodec: CPU flags: mmx 3dnow
Detected video codec: [ffdivx] drv:5 prio:0 (FFmpeg DivX ;-) (MS MPEG-4 v3))
==========================================================================
AO: [oss] 44100Hz Stereo Signed 16-bit (Little-Endian)
AO: Description: OSS/ioctl audio output
AO: Author: A'rpi
Start playing...
ao2: 44100 Hz  2 chans  Signed 16-bit (Little-Endian)
audio_setup: using '/dev/dsp' dsp device
audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endian))
audio_setup: using 2 channels (requested: 2)
audio_setup: using 44100 Hz samplerate (requested: 44100)
audio_setup: frags:  16/16  (4096 bytes/frag)  free:  65536
VDec: vo config request - 576 x 320, Planar YV12  
[PP] Sorry, postprocessing is not available
vo_debug: query(Planar YV12) returned 0x401 (i=0) 
vo_debug: query(Planar I420) returned 0x401 (i=1) 
vo_debug: query(Planar IYUV) returned 0x401 (i=2) 
Movie-Aspect is undefined - no prescaling applied.
video_out->init(576x320->576x320,flags=0,'MPlayer',0x32315659)
VO: [xmga] 576x320 => 576x320 Planar YV12 
VO: Description: X11 (Matrox G200/G400 overlay in window using /dev/mga_vid)
VO: Author: Zoltan Ponekker <pontscho at makacs.poliod.hu>
[x11] Detected wm is of class NetWM.
X11 opening display: :0
vo: X11 color mask:  FFFF  (R:F800 G:7E0 B:1F)
vo: X11 running at 1152x864 with depth 16 and 16 bits/pixel (":0" => local display)
[xmga] dcx: 5 dcy: 22 dx: 0 dy: 0 dw: 576 dh: 320
[xmga] dcx: 5 dcy: 22 dx: 0 dy: 0 dw: 576 dh: 320
*** [vo] Exporting mp_image_t, 576x320x12bpp YUV planar, 276480 bytes
[xmga] dcx: 5 dcy: 22 dx: 0 dy: 0 dw: 576 dh: 320
A:   0.2 V:   0.0 A-V:  0.174 ct:  0.000    1/  1   0%  0%  0.0% 0 0 0%
XXX initial  v_pts=0.000  a_pos=7923 (0.496) 
*** free_stream() called ***
vo: uninit!
vo: uninit ...

Exiting... (Quit)





00:00.0 Host bridge: Acer Laboratories Inc. [ALi] M1541 (rev 04)
	Subsystem: Acer Laboratories Inc. [ALi] ALI M1541 Aladdin V/V+ AGP System Controller
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 64
	Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
	Capabilities: [b0] AGP version 1.0
		Status: RQ=28 SBA+ 64bit- FW- Rate=x1,x2
		Command: RQ=28 SBA+ AGP+ 64bit- FW- Rate=x1

00:01.0 PCI bridge: Acer Laboratories Inc. [ALi] M5243 (rev 04) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	Memory behind bridge: df000000-dfffffff
	Prefetchable memory behind bridge: e6f00000-e7ffffff
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-

00:02.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03) (prog-if 10 [OHCI])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (20000ns max)
	Interrupt: pin A routed to IRQ 9
	Region 0: Memory at de800000 (32-bit, non-prefetchable) [size=4K]

00:03.0 Bridge: Acer Laboratories Inc. [ALi] M7101 PMU
	Subsystem: Acer Laboratories Inc. [ALi] ALI M7101 Power Management Controller
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge [Aladdin IV] (rev c3)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort+ >SERR- <PERR-
	Latency: 0

00:09.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 74)
	Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 9
	Region 0: I/O ports at d800 [size=128]
	Region 1: Memory at de000000 (32-bit, non-prefetchable) [size=128]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-

00:0a.0 VGA compatible controller: Matrox Graphics, Inc. MGA 1064SG [Mystique] (rev 02) (prog-if 00 [VGA])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at dd800000 (32-bit, non-prefetchable) [disabled] [size=16K]
	Region 1: Memory at e6000000 (32-bit, prefetchable) [disabled] [size=8M]
	Region 2: Memory at dd000000 (32-bit, non-prefetchable) [disabled] [size=8M]
	Expansion ROM at e5ff0000 [disabled] [size=64K]

00:0b.0 SCSI storage controller: LSI Logic / Symbios Logic (formerly NCR) 53c875 (rev 03)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 72 (4250ns min, 16000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at d400 [size=256]
	Region 1: Memory at dc800000 (32-bit, non-prefetchable) [size=256]
	Region 2: Memory at dc000000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at <unassigned> [disabled] [size=128K]

00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
	Subsystem: Creative Labs: Unknown device 8061
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (500ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 9
	Region 0: I/O ports at d000 [size=32]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0d.1 Input device controller: Creative Labs SB Live! (rev 07)
	Subsystem: Creative Labs Gameport Joystick
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Region 0: I/O ports at b800 [size=8]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c1) (prog-if 8a [Master SecP PriP])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (500ns min, 1000ns max)
	Interrupt: pin A routed to IRQ 0
	Region 4: I/O ports at b400 [size=16]

01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 01) (prog-if 00 [VGA])
	Subsystem: Matrox Graphics, Inc. Millennium G200 AGP
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (4000ns min, 8000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at e7000000 (32-bit, prefetchable) [size=16M]
	Region 1: Memory at df800000 (32-bit, non-prefetchable) [size=16K]
	Region 2: Memory at df000000 (32-bit, non-prefetchable) [size=8M]
	Expansion ROM at e6ff0000 [disabled] [size=64K]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [f0] AGP version 1.0
		Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
		Command: RQ=28 SBA+ AGP+ 64bit- FW- Rate=x1




More information about the MPlayer-users mailing list